Page 1 of 1

Aluminium shafts working themselves loose from the barrel

Posted: Fri Sep 08, 2017 4:11 pm
by Henrik
Hi,

In case, you have this problem - which I have also had myself recently - just found a hint on Youtube :

Cut out a tiny piece of non-sticky cellophane from some packaging. Put it between the aluminium shaft and the darts arrow and screw them tight together. Seems to be working fine against this problem and costs nothing ...

Re: Aluminium shafts working themselves loose from the barre

Posted: Sat Sep 09, 2017 3:43 pm
by D & B
Jesus fucking wept!

Re: Aluminium shafts working themselves loose from the barrel

Posted: Thu Aug 26, 2021 6:24 pm
by Ross, Bob
Henrik wrote: Fri Sep 08, 2017 4:11 pm Hi,

In case, you have this problem - which I have also had myself recently - just found a hint on Youtube :

Cut out a tiny piece of non-sticky cellophane from some packaging. Put it between the aluminium shaft and the darts arrow and screw them tight together. Seems to be working fine against this problem and costs nothing ...
Henrik, mate.

Just tried it, works like a charm.

Re: Aluminium shafts working themselves loose from the barrel

Posted: Thu Aug 26, 2021 6:49 pm
by The Thorn
I did this with my shaft too. It doesn't work for some reason.

Re: Aluminium shafts working themselves loose from the barrel

Posted: Thu Aug 26, 2021 7:22 pm
by Ross, Bob
The Thorn wrote: Thu Aug 26, 2021 6:49 pm I did this with my shaft too. It doesn't work for some reason.
Maybe let someone else try it on your shaft.
I'm sure Dave would be more than willing to lend a helping hand.

Re: Aluminium shafts working themselves loose from the barrel

Posted: Thu Aug 26, 2021 11:52 pm
by The Thorn
Ross, Bob wrote: Thu Aug 26, 2021 7:22 pm
The Thorn wrote: Thu Aug 26, 2021 6:49 pm I did this with my shaft too. It doesn't work for some reason.
Maybe let someone else try it on your shaft.
I'm sure Dave would be more than willing to lend a helping hand.
He told me he was a natural at screwing shafts

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 3:28 pm
by Mabbsy
Try using plastic shafts instead.

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 3:43 pm
by tungsten tossers
Mabbsy wrote: Tue Aug 31, 2021 3:28 pm Try using plastic shafts instead.
Thorn uses plastic shafts regularly

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 5:10 pm
by Mabbsy
tungsten tossers wrote: Tue Aug 31, 2021 3:43 pm
Mabbsy wrote: Tue Aug 31, 2021 3:28 pm Try using plastic shafts instead.
Thorn uses plastic shafts regularly
Easily sterlized after use I guess

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 5:13 pm
by tungsten tossers
Mabbsy wrote: Tue Aug 31, 2021 5:10 pm
tungsten tossers wrote: Tue Aug 31, 2021 3:43 pm
Mabbsy wrote: Tue Aug 31, 2021 3:28 pm Try using plastic shafts instead.
Thorn uses plastic shafts regularly
Easily sterlized after use I guess
I don't think it matters to him :D

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 5:21 pm
by The Thorn
tungsten tossers wrote: Tue Aug 31, 2021 5:13 pm
Mabbsy wrote: Tue Aug 31, 2021 5:10 pm
tungsten tossers wrote: Tue Aug 31, 2021 3:43 pm
Mabbsy wrote: Tue Aug 31, 2021 3:28 pm Try using plastic shafts instead.
Thorn uses plastic shafts regularly
Easily sterlized after use I guess
I don't think it matters to him :D
I never wash them. So they slide in easier the next time

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 5:36 pm
by Mabbsy
The Thorn wrote: Tue Aug 31, 2021 5:21 pm
tungsten tossers wrote: Tue Aug 31, 2021 5:13 pm
Mabbsy wrote: Tue Aug 31, 2021 5:10 pm
tungsten tossers wrote: Tue Aug 31, 2021 3:43 pm
Mabbsy wrote: Tue Aug 31, 2021 3:28 pm Try using plastic shafts instead.
Thorn uses plastic shafts regularly
Easily sterlized after use I guess
I don't think it matters to him :D
I never wash them. So they slide in easier the next time
Filth.

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 5:49 pm
by The Thorn
Mabbsy wrote: Tue Aug 31, 2021 5:36 pm
The Thorn wrote: Tue Aug 31, 2021 5:21 pm
tungsten tossers wrote: Tue Aug 31, 2021 5:13 pm
Mabbsy wrote: Tue Aug 31, 2021 5:10 pm
tungsten tossers wrote: Tue Aug 31, 2021 3:43 pm

Thorn uses plastic shafts regularly
Easily sterlized after use I guess
I don't think it matters to him :D
I never wash them. So they slide in easier the next time
Filth.
Here's one for you mate

Image

Re: Aluminium shafts working themselves loose from the barrel

Posted: Tue Aug 31, 2021 6:16 pm
by Mabbsy
Thorn posting his toys there